Tile classification

Update:12 Apr 2018
Summary:

1, whole body brick The surface of the bricks is not gl […]

1, whole body brick

The surface of the bricks is not glazing, and the material and color of the front and back surfaces are the same, hence the name. Whole brick is a kind of wear-resistant brick, although there are other varieties such as osmotic brick, but relatively speaking, its color is less than glazed tile. As interior design is more and more inclined to plain design, whole body bricks are becoming more and more fashionable. They are widely used on the grounds of renovation projects such as halls, aisles and outdoor walkways. Generally, they are less likely to be used for walls. Most non-slip bricks are all bricks. The common specifications of bricks are 300x300mm, 400x400mm, 500x500mm, 600x600mm, 800x800mm and so on.

2, polished tiles

The polished brick is a kind of bright brick that has been polished on the surface of the whole body. Polished bricks are a kind of bricks. Compared to the flat surface roughness of a brick, the polished tile must be brighter and cleaner. Polished tiles are hard, wear-resistant and suitable for use in most indoor spaces except the restroom, kitchen and indoor environment. Based on the application of the infiltration technology, the polished tiles can make various kinds of imitated stone and wood effect. Perhaps it is the industry's general idea, perhaps the intention of the industry, but the polished brick has left a fatal flaw: easy to dirty. This is caused by the uneven pores that are left by the polishing of the polished tiles. These pores can contaminate the stains, causing the polished tiles to be stained and discolored. Even some of the tea is poured on the polished tiles. Perhaps everyone realizes this, in the later some good quality polished bricks have added a layer of anti-fouling layer at the factory, but this layer of anti-fouling layer makes the tiles lose the effect of brick body. If you want to continue the whole body, you have to continue to brush the antifouling layer. In the decoration industry, water wax is applied before construction to prevent sticking. The common specifications for polished tiles are 400x400mm, 500x500mm, 600x600mm, 800x800mm, 900x900mm, 1000x1000mm.

3, glass tiles

In order to solve the easy-to-dirt problem of polished tiles, there is another variety called vitrified tile. Vitrified tiles are actually full tiles. The surface is smooth but does not require polishing, so there is no problem with polishing the pores. Vitrified tiles are a kind of reinforced polished tiles that are fired from high temperatures. The texture is harder and more resistant than the polished tiles. There is no doubt that its price is also higher. Vitrified bricks are mainly floor tiles, and commonly used plans are 400x400mm, 500x500mm, 600x600mm, 800x800mm, 900x900mm, and 1000x1000mm.

4, mosaic

Mosaic is a kind of special existence brick, which generally consists of dozens of small bricks to form a relative big brick. It is widely used in indoor small-scale wall surface and outdoor large size wall and ground with small size and colorful.